The use of different labeling machines

　　The use of different labeling machines.

　　The first point: labeling machine label paper how to normal installation

　?、?increase the label needs to ensure that the label is properly pressurized, if the pressure is too large in the labeling will cause labeling episodes of misalignment, together with the deceleration of the label hook will also constitute a certain wear and tear.

　?、?increase the label needs to ensure that the label alignment, the first label between the guide fork need to adhere to 0.1 ~ 0.2mm and clip finger to evenly press the label on the side bar. After the clip finger open, the sponge wheel needs to press the label on the bottle, the beginning to ensure that the labeling will not be skewed need to schedule a good longitudinal positioning plate.

　　The second point: the labeling machine mission out of the label detection

　　Take the automatic round bottle labeling machine, when the bottle through the conveyor belt to reach the labeling position, you need to ensure that the label brush straight and smooth to uniformly press the label brush, the process assumes that the lack of pressure or too much pressure will be skewed labeling position, so this point requires the operator to pay attention to, when found active labeling machine labeling skewed situation, should adjust the brush pressure.

　　Third: hot melt adhesive labeling machine process needs to pay attention to the following points

　?、?When the label plate glue layer thickness is too thick to clear in time, otherwise it will constitute a label shift.

　　② glue temperature to moderate, the temperature is too low will incur viscosity decline, labeling is not allowed. The temperature is too high will constitute a labeling glue overflow affect the product beautiful, so the use of glue is required according to the paper pleading temperature intermittent scheduling.

　?、?product selection of suitable labeling paper, this is very important.

　?、躎he labeling machine should be cleaned regularly, such as rotation wheel, label box, scraping plate, rubber roller, etc. Familiarity is the condition of driving, details choose to use the length of time. A little more care, will bring greater value.